A quotation is only as accurate as the information behind it. A clean drawing package helps Silicone Nest understand the part, recommend a process and return a more useful custom silicone quote.
Table of contents
- Build the file set
- Mark the important dimensions
- Add material and quality requirements
- Use the confidential upload form
- FAQ
Build the file set
Send a dimensioned PDF for quick review and a STEP/STP or DWG file for geometry. Name files with the project and revision, for example project-part-revA.step. Include an assembly view or reference image if the part must fit with other components.
Mark the important dimensions
- Overall dimensions and critical interfaces
- Tolerances for sealing, snap-fit and assembly features
- Wall thickness, draft and parting-line expectations
- Cosmetic faces, texture and logo areas
- Flash, trim and inspection requirements
If a dimension is flexible, state the acceptable range. That distinction helps the process review focus on what affects function and cost.
Add material and quality requirements
State target hardness, color, finish, temperature exposure, cleaning and contact conditions. If an FDA-related material option is required, identify the intended use and documentation needed. Also include expected quantity; Silicone Nest typically works from an MOQ of 3,000 pieces.
Use the confidential upload form
The secure form accepts PDF, STEP/STP and DWG. You can upload up to 5 files, 5 MB each, with a 25 MB total limit. Files are confidential, available only to the administrator at info@siliconenest.com, and retained for 30 days.
After review, sampling is approximately 7 days. Batch production is approximately 15 days after sample approval and order confirmation.
FAQ
Can I upload only a PDF?
Yes. A PDF is enough to start a discussion, although a CAD file usually makes geometry review more efficient.
What if my files exceed 25 MB?
Split the package into the most relevant files or contact info@siliconenest.com for guidance before sending confidential material.
Related Silicone Nest articles
- Custom Silicone Product Development: From Drawing to Production
- Silicone Prototype to Production Timeline
Request a confidential quote
For a custom silicone project, send your drawing and requirements through the Silicone Nest confidential RFQ form. Accepted formats are PDF, STEP/STP and DWG; upload up to 5 files, 5 MB each, with a 25 MB total limit. Files are confidential, access is limited to the administrator at info@siliconenest.com, and files are retained for 30 days.
Start a custom manufacturing RFQ or email the project team with questions. Typical MOQ is 3,000 pieces; sampling is approximately 7 days and batch production is approximately 15 days after approval and order confirmation.